How to root oneplus 5 and install twrp recovery

The Oneplus sports a 16-megapixel rear camera with PDAF (phase detection autofocus), an f/1.7 aperture and dual-tone LED flash with EIS & OIS. The 16-megapixel front camera ports an 84-degree wide angle lens.It has a superb Snapdragon 835 processor.It comes with 3300 mAh battery capacity which can last for more than a day with mixed usage. It comes with dash charge which charges your phone faster.Without wasting any more time lets get started.


Disclaimer:

lineageosrom.com is not responsible for any damage happened to your device(s) while following this guide, Proceed at your own risk.

Requirements:

This method is only for the Oneplus 5. Do not try it on any other device.
It is advisable to take a backup of your device before proceeding further.
Ensure that your phone has at least 70-80% charged to prevent the accidental shutdown in-between the process.

Downloads:

1.Download twrp recovery

How to Install OnePlus 5 TWRP Recovery

Step1 – The first thing you have to do is to Unduh Fastboot / ADB package from the following links depending on your OS and extract it anywhere in your PC.

Windows: Download here!
OS X: Download here!
Linux: Download here!

Step 2 – Turn OFF your phone.

Step 4 – Download TWRP (twrp-3.0.3-1-oneplus5.img) then rename it to twrp.img and save it into the same directory as the extracted Fastboot/ADB package files.

Step 3 – The next thing you have to do is to Connect your OnePlus 5 to your computer via USB cable

Step 5 – Now go into Fastboot/Bootloader Mode on OnePlus 5. {Press Volume Up + Power keys for a few seconds till you see some text on the screen.} Now,you have successfully entered in bootloader


Step 6 –Now, Navigate to the same directory now as where you have Fastboot (i.e. Step 1) and on Windows: Open Command Prompt (Shift + Right-click > Open Command Prompt). For Mac OS X and Linux, use Terminal for navigating to this directory.

fastboot flash recovery twrp.img

Step 7 – Type in the following command and press Enter on the device’s screen.

Step 8 – Now,you have to Enter in Recovery Mode (TWRP recovery) now. Turn OFF your device. Now you have press and hold the Volume Down + Power keys together until the OnePlus logo shows up. Once it does, release the Power button while still holding the Volume Down button until a screen  of twrp shown.Step 8- Now install super-su.zip from twrp recovery.

you have successfully update your oneplus 5 to latest TWRP 3.0.3

If still any queries left in your mind,feel free to ask via comment section

Download best iOS 11 Theme for any Xiaomi Mi Devices MIUI 8 [.mtz]

Now you can install iOS 11 theme on you MI Phone based on MIUI 8.This theme is really outstanding.This iOS 11 theme for mini phone is fully featured theme with themed system UI components.This theme is not for lineage os theme its only for MIUI 8 Based theme.

It really looks real iOS 11 the developer of this theme really done a great job in creating this great iOS 11 theme for below MI Device.You can check the screenshot of iOS 11 theme for Xiaomi MI phones.

Supported Devices for iOS 11 theme: 

1. Xiaomi Redmi note 3 Snapdragon
2. Xiaomi redmi note 3 Mediatek
3. Xiaomi redmi note 2
4. Xiaomi redmi note 2 Prime
5. Xiaomi redmi note 3G
6. Xiaomi redmi Note 4G
7. Xiaomi Mi max
8. Xiaomi Redmi 3s
9. Xiaomi redmi 3s Prime
10. Xiaomi redmi 2s
11. Xiaomi redmi 2s Prime
12. Xiaomi redmi 1s
13. Xiaomi Redmi note 4
14. Xiaomi Mi 5
15. Xiaomi mi 4 / Mi 4i / Mi 4c
16. Xiaomi mi 3
17. Xiaomi mi note 2
18. Xiaomi Mi mix

#Screenshots

 

#Download

1.Download iOS 11 theme for MI Phones


How to install iOS 11 themes on Xiaomi MIUI phones

Step 1: Once you’ve downloaded the MIUI theme in .mtz extension on your computer, copy the same into your device storage or SD card using a standard USB cable.

Step 2: Go to app drawer on your device and launch the Themes app.

Step 3: Under Theme tab, you need to select Offline.

Step 4: Here you’ll see the list of all offline themes that comes pre-installed within your smartphone.


Step 5: Scroll down and tap on Import.

Step 7: Now, access to the appropriate folder, and tap the .mtz theme file which you have saved to device storage.

Step 8: The theme will install and it will be shown along with other offline themes.

Step 9: Select the theme and tap on “Apply”.

That’s it! The new theme will be automatically applied on your device.

Note: The above guide is compatible only with Xiaomi Mi & Redmi phones running on MIUI 8. If you’re have a Xiaomi phone with other version, then there is chances that the steps and screenshots will be different.

[Unofficial] Unduh LineageOS Samsung Galaxy J7 (SM-J700P) Nougat 7.1.1

Download Unofficial Lineage OS For Samsung Galaxy J7 (SM-J700P) Nougat 7.1.1. Unofficial Lineage os is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Unofficial LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.


DISCLAIMER:

THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. HAVE A BACKUP BEFORE FLASHING THIS AND TRY AT YOUR OWN RISK.

Installing a custom ROM on a Samsung Galaxy J7 (SM-J700P) requires the bootloader to be unlocked on the Samsung Galaxy J7 (SM-J700P) phone, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone and I cannot be held responsible for the mistakes done by you.

Status of Unofficial Lineage os for Samsung Galaxy J7 (SM-J700P) Nougat 7.1 Custom ROM:

WHAT’S WORKING:
– Not Known
KNOWN ISSUES:
– Not Known

Before Starting

Take care of following tasks before you proceed with flashing custom ROM:

Task 1: Install USB drivers for your device on your PC.

Task 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.

Task 3: Make sure that your device is well charged. Ideally, the battery level should be around 60-80%. The more the better.

Task 4: USB Debugging should be enabled on your device.

Important: Most of the custom ROM will not have Google Apps in them. So, you will have to unduh and install GApps manually.Also take nandroid backup before installing

Done with preliminary precautionary steps? So, here’s the guide:

TWRP recovery let’s you do a number of cool stuff but the whole point of having a custom recovery is to be able to flash unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.

Let’s see how to flash a lineage os rom on Samsung Galaxy J7 (SM-J700P) using TWRP recovery.

How to Install a unofficial Lineageos on Samsung Galaxy J7 (SM-J700P)

1. Download and transfer the unofficial Lineage os ROM and Gapps for linage os you wish to flash to your device’s storage.
2. Boot your device into TWRP recovery.
3. Select “Wipe” from TWRP main menu and do a “Swipe to Factory Reset” on the bottom of screen.
   └ Note: This will factory reset your device. If your custom ROM doesn’t require a factory reset, then simply skip this step.
   
4. Go back to TWRP main menu, tap on “Install” and select the unofficial Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
5. After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of screen to begin the custom ROM installation process. This may take some time.
   
6. Once your ROM is successfully flashed, you’ll see “Wipe cache/dalvik” option, select it and then do “Swipe to wipe” on bottom of screen.
7. Once cache & dalvik wipe completes, hit the “Back” button on-screen and then select “Reboot System” button.

DOWNLOAD UNOFFICIAL LINEAGE OS FOR Samsung Galaxy J7 (SM-J700P)

1.Download Gapps for Unofficial Lineage OS 7.1.1

2.How to Root unofficial Lineage OS rom Easily

[Unofficial] Unduh LineageOS Lenovo A7000 (aio_row) Nougat 7.1.1

Download Ununofficial Lineage OS For Lenovo A7000 (aio_row) Nougat 7.1.1. Unofficial Lineage os is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Unofficial LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.


DISCLAIMER:

THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. HAVE A BACKUP BEFORE FLASHING THIS AND TRY AT YOUR OWN RISK.

Installing a custom ROM on a  Lenovo A7000 (aio_row) requires the bootloader to be unlocked on the  Lenovo A7000 (aio_row) phone, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone and I cannot be held responsible for the mistakes done by you.

Status of Unofficial Lineage os for  Lenovo A7000 (aio_row) Nougat 7.1 Custom ROM:

WHAT’S WORKING:
– Not Known
KNOWN ISSUES:
– Not Known

Before Starting

Take care of following tasks before you proceed with flashing custom ROM:

Task 1: Install USB drivers for your device on your PC.

Task 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.

Task 3: Make sure that your device is well charged. Ideally, the battery level should be around 60-80%. The more the better.

Task 4: USB Debugging should be enabled on your device.

Important: Most of the custom ROM will not have Google Apps in them. So, you will have to unduh and install GApps manually.Also take nandroid backup before installing

Done with preliminary precautionary steps? So, here’s the guide:

TWRP recovery let’s you do a number of cool stuff but the whole point of having a custom recovery is to be able to flash unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.

Let’s see how to flash a lineage os rom on  Lenovo A7000 (aio_row) using TWRP recovery.

How to Install a unofficial Lineageos on  Lenovo A7000 (aio_row)

1. Download and transfer the unofficial Lineage os ROM and Gapps for linage os you wish to flash to your device’s storage.
2. Boot your device into TWRP recovery.
3. Select “Wipe” from TWRP main menu and do a “Swipe to Factory Reset” on the bottom of screen.
   └ Note: This will factory reset your device. If your custom ROM doesn’t require a factory reset, then simply skip this step.
   
4. Go back to TWRP main menu, tap on “Install” and select the unofficial Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
5. After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of screen to begin the custom ROM installation process. This may take some time.
   
6. Once your ROM is successfully flashed, you’ll see “Wipe cache/dalvik” option, select it and then do “Swipe to wipe” on bottom of screen.
7. Once cache & dalvik wipe completes, hit the “Back” button on-screen and then select “Reboot System” button.

DOWNLOAD UNOFFICIAL LINEAGE OS FOR  Lenovo A7000 (aio_row)

1.Download Gapps for Unofficial Lineage OS 7.1.1

2.How to Root unofficial Lineage OS rom Easily

[Official] Unduh LineageOS Samsung Galaxy J3 (2016) (SM-J320FN) Nougat 7.1.1

Download Official Lineage OS For Samsung Galaxy J3 (2016) (SM-J320FN) Nougat 7.1.1. Official Lineage os is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Official LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.


DISCLAIMER:

THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. HAVE A BACKUP BEFORE FLASHING THIS AND TRY AT YOUR OWN RISK.

Installing a custom ROM on a Samsung Galaxy J3 (2016) (SM-J320FN) requires the bootloader to be unlocked on the Samsung Galaxy J3 (2016) (SM-J320FN) phone, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone and I cannot be held responsible for the mistakes done by you.

Status of Official Lineage os for Samsung Galaxy J3 (2016) (SM-J320FN) Nougat 7.1 Custom ROM:

WHAT’S WORKING:
– Not Known
KNOWN ISSUES:
– Not Known

Before Starting

Take care of following tasks before you proceed with flashing custom ROM:

Task 1: Install USB drivers for your device on your PC.

Task 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.

Task 3: Make sure that your device is well charged. Ideally, the battery level should be around 60-80%. The more the better.

Task 4: USB Debugging should be enabled on your device.

Important: Most of the custom ROM will not have Google Apps in them. So, you will have to unduh and install GApps manually.Also take nandroid backup before installing

Done with preliminary precautionary steps? So, here’s the guide:

TWRP recovery let’s you do a number of cool stuff but the whole point of having a custom recovery is to be able to flash unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.

Let’s see how to flash a lineage os rom on Samsung Galaxy J3 (2016) (SM-J320FN) using TWRP recovery.

How to Install a official Lineageos on Samsung Galaxy J3 (2016) (SM-J320FN)

1. Download and transfer the official Lineage os ROM and Gapps for linage os you wish to flash to your device’s storage.
2. Boot your device into TWRP recovery.
3. Select “Wipe” from TWRP main menu and do a “Swipe to Factory Reset” on the bottom of screen.
   └ Note: This will factory reset your device. If your custom ROM doesn’t require a factory reset, then simply skip this step.
   
4. Go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
5. After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of screen to begin the custom ROM installation process. This may take some time.
   
6. Once your ROM is successfully flashed, you’ll see “Wipe cache/dalvik” option, select it and then do “Swipe to wipe” on bottom of screen.
7. Once cache & dalvik wipe completes, hit the “Back” button on-screen and then select “Reboot System” button.

DOWNLOAD OFFICIAL LINEAGE OS FOR Samsung Galaxy J3 (2016) (SM-J320FN)

1.Download Gapps for Official Lineage OS 7.1.1

2.How to Root official Lineage OS rom Easily

[Guide] How To Flash / Install GApps via TWRP Recovery?

How to install Gapps via any TWRP recovery? many peoples are new in rooting and don't know how to flash gapps through custom recovery.In this guide, we will show you how to install/flash google gapps via twrp recovery with step by step guide.

Before starting we want you to know some basic requirements of install gapps via twrp recovery.

1.You must unduh right GApps pack.
download gapps for your custom roms from below link.
a.Download Google Apps For Android 6.0 Marshmallow.
b.Download Google Apps For Android 7.0 Nougat.




c.Download Google Apps For Android 7.1 Nougat.

2.You must have twrp recovery installed.
3.Now connect your device to PC and transfer the Gapps pack to the internal memory of your device.
see also:How To Install Lineage Os ROM On Any Android Device [2 Methods]

How to install Gapps via TWRP recovery.

1.Boot your device into TWRP recovery mode.
(In Samsung phones, where you will have to hold ‘Power + Home + Volume Up’ and for most of the phones it is Power + Vol.Up button).

2.From TWRP Recovery menu, tap on “Install” and select the Gapp.Zip file that you have copied in your internal memory.

3.After selecting the gapps.zip file, do “Swipe to Confirm Flash” in the bottom of the screen to begin the Google Apps installation process. 

4.This may take some time to install gapps on your device.

5.Now return to the TWRP main menu and tap the “Wipe cache/Dalvik” button TWRP’s “Wipe cache/Dalvik” button.

6.Once above steps are done you just need to reboot your device just go twrp main menu and reboot your device.
.
If you have any question or suggestion regarding this article, feel free to leave that in the comment section below

[Guide] How To Flash a Custom ROM & Custom Recovery Via Odin [Updated]

Hey, guys welcome here and today we are going to tell you about that how to flash a custom rom via Odin and how to flash custom recovery via Odin in your Samsung smartphone. You can also flash stock firmware in Samsung devices via odin. Odin is the software which is made for Samsung devices only you can do all the things which are mention above in your Samsung smartphone. So without wasting the time lets get started to How To Flash a Custom ROM & Custom Recovery Via Odin.

Odin is a very useful Windows tool that lets you install stock firmware / flash Cuatom ROM on your Android device. Here is a step by step guide on how to use Odin to flash custom ROM on your Samsung smartphone

Before You Start

Install USB drivers for your device on your PC. You can unduh and install Samsung Kies which will automatically install device drivers.

Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.

Make sure that your device is well charged. Ideally, the battery level should be around 60-80%. The more the better.

USB Debugging should be enabled on your device.

Make sure that Samsung Kies is not running

Downloads

1.Download Odin for Windows.

2.Custom ROM Zip


Note: We will not be responsible for any damage done to your device. Do it on your own risk.

How To Flash a Custom ROM & Custom Recovery Via Odin

First we are going to tell you about How To Flash Custom ROM via Odin in samsung devices.

Step 1: Unduh the official custom rom zip package for your device. Then extract the downloaded zip file. After extracting, you will either get one .tar / .tar.md5 file or will get multiple files.

If you get one file, it will have everything inside it: PDA + Phone + CSC.

If you get multiple files, there will be separate files for PDA, Phone & CSC.

Step 2: Download Odin3_v3.04.zip and extract the downloaded zip file. You will get following files:

1.Odin3 v3.04.exe
2.tmax.dll
3.zlib.dll
4.Odin3.ini

Step 3: Right click on Odin3 v3.04.exe and run it as eksekutif to start Odin.

Step 4: Boot your device in unduh mode. For most Samsung devices, you will need to do this:

Switch your device off.

Press & hold Power + Home + Volume down buttons till you see a triangle and Android robot.

Now press the Volume up button to confirm entering the unduh mode.

Step 5: Once it is in unduh mode, connect your device to the computer via USB cable.

When your device is connected, one of Odin ID:COM boxes will turn yellow and display the COM port number

Step 6: If the rom zip package had just one file, click on PDA button, then browse and select the firmware file (.tar or .tar.md5).

If the firmware package had multiple files:

Click on PDA button, then browse and select the file that has CODE / PDA in its name.

Click on Phone button and select the file that has MODEM in its name.

Click on CSC button and select the file with CSC in its name.

Skip any files that you did not find in the package.

Make sure that you do not mess up with checkboxes:

Auto Reboot and F. Reset Time checkboxes should be selected

All other checkboxes should be unchecked.

After selecting the appropriate files, click on “Start” button in Odin.

This will kick off the process to flash the ROM. Please do not disconnect your device during the process. Once flashing is complete, your device will reboot. You can now disconnect from the PC and start using it. SO guys this is all about How To Flash Custom ROM via Odin in samsung devices.

That’s it. You can use these steps to flash custom ROM on your samsung device using Odin.

Now We are going to talk about How To Flash/Install Custom Recovery via Odin in Samsung devices

How To Flash/Install Custom Recovery via Odin
Custom recovery developed and maintained by the folks over at TeamWin. Using TWRP, you can take full device (nandroid) backups, plus install/flash rooting scripts like SuperSU, Custom ROMs/MODs and other similar stuff. TWRP recovery is available as both official and unofficial builds.

Step 1: Unzip the file and run/open Odin.exe file from the extracted files on your PC.

Make sure you’ve downloaded a Odin flashable TWRP recovery .tar file compatible for your device.

(If applicable) Enable OEM unlock:

Go to Settings » About phone » and tap Build number seven times to enable Developer options.

Step 2: Go back to main Settings page, scroll to bottom and select Developer options from there.

Step 3: Under Developer options, look for Enable OEM unlock checkbox/toggle and enable it.

Boot your device into Unduh mode:

Switch off your device.


Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.

Press Volume Up on the warning screen to accept it and boot into Unduh mode.

Step 4: Once your device is in unduh mode, connect it to the PC with a USB cable. The Odin window on PC should detect the device and show an “Added!!” message.

Step 5: Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.

Note: DON’T play with any other options on the screen. You’re only required to connect your device and select the TWRP recovery .tar file in the AP tab.

Step 6: Click the Start button on Odin and wait for it to finish the process. Once it has finished successfully, you’ll see a pass message on the Odin screen.

Your device will automatically reboot when Odin is done flashing. You can then disconnect your device.



So guys this is all about How To Flash a Custom ROM & Custom Recovery Via Odin follow the steps carefully and if you need any help just comment below we will reply you asap. Keep visiting <3